LFP0300-N1DMB

Specification: Part Number 1071139 Ambient storage temperature: -40 °C ... +80 °C Response time: < 400 ms Max.probe load: 6 Nm Process temperature: -20 °C ... +180 °C Power consumption: &le; 75 mA at 24 V DC without output load Ambient temperature coaxial cable: -20 °C ... +60 °C Accuracy of sensor element: ± 5 mm IO-Link: + Length coaxial cable: 3.3 m, FEP Measurement: Switch, Continuous Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 13,5 V Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono probe Hysteresis: Min. 2 mm, free adjustable Inactive area at process connector: 25 mm Repeatability: &le; 2 mm Upper signal level: 20 mA ... 20.5 mA 3-A: - Capacitive load: 100 nF Signal voltage LOW: &le; 2 V RoHS certificate: + Supply voltage: 12 V DC ... 30 V DC Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Conductivity: No limitation EMC: EN 61326-1:2006, 2004/108/EG Interference emission: EN 61000-6-4:2007 Signal voltage HIGH: Vs - 2 V EHEDG approval: + Process connection: ¾" NPT Lower signal level: 3.8 mA ... 4 mA Process pressure: -1 bar ... 16 bar Ambient temperature operation: -20 °C ... +60 °C Wetted parts: 316L (Ra &le; 0,8 µm), PEEK GOST approval: + Medium: Fluids Initialization time: &le; 2 s Housing material: 303 Probe length: 300 mm Connection type: Round connector M12 x 1, 5-pin Resolution: < 2 mm Temperature drift: < 0.1 mm/K Single- and continuous shock: EN 60068-2-27 Output current: < 100 mA Inactive area at probe end: 10 mm Interference resistance: EN 61000-6-2:2005 Inductive load: < 1 H UL approval: + Housing design: With PMMA viewing window MTTF: 194.3 a (EN ISO 13849-1) Protection class: III