LFP0200-A4NMB

Specification: Part Number 1057073 Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono rod probe / rope probe Output current: < 100 mA Hysteresis: Min. 2 mm, free adjustable MTTF: 194.3 a (EN ISO 13849-1) Medium: Fluids Signal voltage HIGH: Vs - 2 V Max.probe load: 6 Nm Process temperature: -20 °C ... +100 °C Upper signal level: 20 mA ... 20.5 mA Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Conductivity: No limitation CULus certificate: + Supply voltage: 12 V DC ... 30 V DC Resolution: < 2 mm Design: Standard Process connection: G ¾ A Connection type: Round connector M12 x 1, 5-pin Probe type: Mono rod probe Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. IO-Link: + Process pressure: -1 bar ... 10 bar Temperature drift: < 0.1 mm/K Protection class: III Response time: < 400 ms Signal voltage LOW: &le; 2 V Accuracy of sensor element: ± 5 mm Ambient storage temperature: -40 °C ... +80 °C Lower signal level: 3.8 mA ... 4 mA Maximum level change: 500 mm/s Power consumption: &le; 100 mA at 24 V DC without output load Inactive area at probe end: 10 mm Initialization time: &le; 5 s Capacitive load: 100 nF Inductive load: < 1 H RoHS certificate: + Probe length: 200 mm Repeatability: &le; 2 mm Housing material: Plastic PBT Ambient temperature operation: -20 °C ... +60 °C Measurement: Switch, Continuous GOST approval: + EMC: EN 61326-1:2006, 2004/108/EG Inactive area at process connector: 25 mm Enclosure rating: IP 67: EN 60529 Wetted parts: 1.4404, PTFE