FFUC20-1G1IO

Specification: Part Number 6049018 Process temperature: 0 °C ... +80 °C Output load: < 500 Ohm Process connection: G 1 Output signal: Analog output: 4 mA ... 20 mA, 0 mA ... 20 mA current flow and temperature 1 pulse/status output: transistor output for flow rate meter, empty pipe detection, flow monitoring, dosing output, flow direction (depending on type) Upper signal level: 20 mA ... 20.5 mA Repeatability: &le; 0.5 % Supply voltage: 18 V DC ... 30 V DC Protection class: III Power consumption: &le; 180 mA Weight: 420 g Conductivity: No limitation Minimim flow: 3.5 l/min Maximum flow: 60 l/min Resolution: 0.012 l/min Wetted parts: PSU Housing material: PSU Process pressure: Max. 10 bar Nominal width measuring tube: NW 20 Inlet zone: 50 cm Response time: Filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s Connection type: Round connector M12 x 1, 5-pin Lower signal level: 3.8 mA ... 4 mA Ambient storage temperature: -20 °C ... +70 °C Impuls/frequency output: 0 kHz ... 10 kHz Output current: < 100 mA Signal voltage LOW: &le; 2 V Outlet zone: 10 cm Initialization time: &le; 5 s Signal voltage HIGH: Vs - 2 V Enclosure rating: IP 67 Inductive load: 1 H Medium: Fluids Capacitive load: 100 nF Puls width: &le; 1 s Ambient temperature operation: 0 °C ... +60 °C Accuracy of sensor element: 1 % (of reading +/- 3 mm/s (with calibration report)) Ripple: &le; 5 Vpp