DBS60E-S4EC00100

Specification: Part Number DBS60E-S4EC00100 Measuring step deviation: ± 18 ° / impulses per relovution Measuring step: 90 ° / electronically/pulses per revolution Resistance to shocks: 250 g, 3 ms (according to EN 60068-2-27) Error limits: Measuring step deviation x 3 Initialization time: < 5 ms Maximum operating speed: 9,000 /min Flange material: Aluminum Reference signal, number: 1 Connection type: Male connector M12, 8-pin, radial Operating speed: 6,000 /min Electrical interface: 10 V ... 27 V, HTL/Push pull Moment of inertia of the rotor: 33 gcm² Working temperature range: -20 °C ... +85 °C Start up torque: 1.2 Ncm (+20 °C) Shaft material: Stainless steel Bearing lifetime: 3.6 x 10^9 revolutions Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Output current: &le; 30 mA, per channel Power consumption max. without load: &le; 1 W Reverse polarity protection: 1 Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Shaft diameter: 10 mm x 19 mm Duty cycle: &le; 0.5 ± 5 % Storage temperature range: -40 °C ... +100 °C, without package Reference signal, position: 90 °, electronically, gated with A and B Permissible shaft loading radial/axial: 100 N (radial), 50 N (axial) Operating torque: 1.1 Ncm (+20 °C) Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Short-circuit protection of the outputs: 1 Mass: 0.3 kg MTTFd: mean time to dangerous failure: 500 a (EN ISO 13849-1) Pulses per revolution: 100 Housing material: Aluminum Maximum output frequency: 300 kHz EMC: (according to EN 61000-6-2 and EN 61000-6-3) Max. angular acceleration: 500,000 rad/s² Mechanical interface: Solid shaft, Face mount flange