DBS60E-S4EA00100

Specification: Part Number DBS60E-S4EA00100 Resistance to shocks: 250 g, 3 ms (according to EN 60068-2-27) Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Output current: &le; 30 mA, per channel Bearing lifetime: 3.6 x 10^9 revolutions Duty cycle: &le; 0.5 ± 5 % Mass: 0.3 kg Permissible shaft loading radial/axial: 100 N (radial), 50 N (axial) Maximum output frequency: 300 kHz Measuring step: 90 ° / electronically/pulses per revolution Working temperature range: -20 °C ... +85 °C Mechanical interface: Solid shaft, Face mount flange Connection type: Connector M23, 12-pin, radial Shaft material: Stainless steel EMC: (according to EN 61000-6-2 and EN 61000-6-3) Max. angular acceleration: 500,000 rad/s² Error limits: Measuring step deviation x 3 Moment of inertia of the rotor: 33 gcm² MTTFd: mean time to dangerous failure: 500 a (EN ISO 13849-1) Reference signal, position: 90 °, electronically, gated with A and B Operating speed: 6,000 /min Housing material: Aluminum Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Power consumption max. without load: &le; 1 W Maximum operating speed: 9,000 /min Pulses per revolution: 100 Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Flange material: Aluminum Shaft diameter: 10 mm x 19 mm Storage temperature range: -40 °C ... +100 °C, without package Operating torque: 1.1 Ncm (+20 °C) Initialization time: < 5 ms Measuring step deviation: ± 18 ° / impulses per relovution Short-circuit protection of the outputs: 1 Electrical interface: 10 V ... 27 V, HTL/Push pull Reference signal, number: 1 Reverse polarity protection: 1 Start up torque: 1.2 Ncm (+20 °C)