DBS50E-S5EP00600

Specification: Part Number 1068482 Moment of inertia of the rotor: 0.65 gcm² Reference signal, number: 1 Connection type: Cable, 8-pin with male connector M12, universal, 0.5 m EMC: (according to EN 61000-6-2 and EN 61000-6-4 (class A)) MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) Shaft diameter: 8 mm x 15.5 m Measuring step: 90 ° / electronically/pulses Start up torque: 0.9 Ncm (+20 °C) Reverse polarity protection: 1 Error limits: ± 54 ° (/pulses per revolution) Duty cycle: &le; 0.5 ± 5 % Max. angular acceleration: 500,000 rad/s² Resistance to shocks: 100 g (EN 60068-2-27) Housing material: Aluminum Shaft material: Stainless steel Initialization time: < 3 ms Operating voltage range: 7 V ... 30 V Operating speed: 6,000 /min Pulses per revolution: 600 Material, cable: PVC Maximum output frequency: 300 kHz Permissible shaft loading radial/axial: 30 N (axial), 50 N (radial) Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) Enclosure rating: IP 65 Electrical interface: 7 V ... 30 V, HTL/Push pull Flange material: Aluminum Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Reference signal, position: 90 °, electronically, gated with A and B Measuring step deviation: ± 18 ° / impulses per relovution Load current max.: 30 mA Mechanical interface: Solid shaft, Face mount flange Working temperature range: -20 °C ... +85 °C Bearing lifetime: 2 x 10^9 revolutions Short-circuit protection of the outputs: 1 Maximum operating speed: 8,000 U/min Power consumption max. without load: 0.5 W, Without load Storage temperature range: -40 °C ... +100 °C, without package Operating torque: 0.6 Ncm (+20 °C)