C4MT-07814ABB03FE0

Specification: Part Number 1207107 Connection type: Male connector M12, 5-pin Resolution: 14 mm Synchronization: Optical, without separate synchronization Display elements: LEDs Scanning range: 0 m ... 4 m Switching voltage LOW: 2 V DC Power consumption: ≤ 3 A Enclosure rating: IP 65 (EN 60529) Configuration method: Hard wired Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) External device monitoring (EDM): + Protection class: III (EN 61140) Cable length: 700 mm Housing material: Aluminum alloy ALMGSI 0.5 Air humidity: 15 % ... 95 %, non-condensing Safe state in the event of a fault: At least one OSSD is in the OFF state. Shock resistance: 10 g, 16 ms (EN 60068-2-27) Typical range: 0 m ... 5 m Performance level: PL e (EN ISO 13849) Housing cross-section (incl. system connection): 15 mm x 32 mm Type: Type 4 (IEC 61496) Ambient operating temperature: -20 °C ... +55 °C External device monitoring (delivery status): Deactivated Safe SICK device communication via EFI/SDL: - Restart interlock: + Restart interlock (delivery status): Deactivated Ripple: ≤ 10 % Protective field height: 780 mm Weight: 280 g Storage temperature: -25 °C ... +70 °C Beam coding: + Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Response time: ≤ 17 ms Switching current: 300 mA Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Automatic beam coding: + Category: Category 4 (EN ISO 13849) Safety integrity level: SIL3 (IEC 61508) SILCL3 (EN 62061) TM (mission time): 20 a (EN ISO 13849) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Conductor cross-section: 0.34 mm² Permitted cable length: ≤ 20 m Cascaded: - PFHd: Standalone system: 4.3  1E-09 (EN ISO 13849) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored