C2MT-10834BBC04FE0

Specification: Part Number 1207920 Cascaded: + Typical range: 0 m ... 8 m Permitted cable length: ≤ 20 m Switching voltage LOW: 2 V DC Cable length: 700 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Power consumption: ≤ 3 A Restart interlock (delivery status): Deactivated Automatic beam coding: + Type: Type 2 (IEC 61496) Protection class: III (EN 61140) Protective field height: 1,080 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Connection type extension connection: Female connector M12, 5-pin Scanning range: 0 m ... 6 m External device monitoring (delivery status): Deactivated Display elements: LEDs Air humidity: 15 % ... 95 %, non-condensing Restart interlock: + Category: Category 2 (EN ISO 13849) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Storage temperature: -25 °C ... +70 °C Housing material: Aluminum alloy ALMGSI 0.5 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Resolution: 34 mm Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Maximum demand rate: 28 /min (EN ISO 13849) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Enclosure rating: IP 65 (EN 60529) Safe state in the event of a fault: At least one OSSD is in the OFF state. External device monitoring (EDM): + Response time: ≤ 13 ms Configuration method: Hard wired Weight: 380 g Connection type: Male connector M12, 5-pin Conductor cross-section: 0.34 mm² Beam coding: + TM (mission time): 20 a (EN ISO 13849) Synchronization: Optical, without separate synchronization Test rate (internal test): 47 /s Ambient operating temperature: -20 °C ... +55 °C Safe SICK device communication via EFI/SDL: - Switching current: 300 mA Ripple: ≤ 10 % Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC)