Specification: Part Number 1037625 EMC: (according to EN 61000-6-2 and EN 61000-6-3) : Servo flange Power consumption: 0.5 W (without load) SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Operating voltage range: 4.5 V DC ... 32 V DC Clock frequency: 1 MHz Initialization time: 50 ms Maximum operating speed: 9,000 /min Code sequence: CW/CCW, parameter adjustable Storage temperature range: -40 °C ... 100 °C, without package Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Permissible Load capacity of shaft: 40 N (axial), 80 N (radial) Shaft diameter: 6 mm Measuring step deviation: ± 0.2 ° Reverse polarity protection: 1 Bearing lifetime: 3.0 x 10^9 revolutions Resolution power: 4,096 x 1 Start up torque: 0.5 Ncm (20 °C) Repeat accuracy: 0.002 ° Code type: Gray Moment of inertia of the rotor: 6.2 gcm² Max. angular acceleration: 500,000 rad/s² MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Operating torque: 0.3 Ncm (20 °C) Measuring step: 0.09 ° 360 ° / number of steps Interface signals: Clock +, Clock -, Data +, Data- Working temperature range: 0 °C ... 85 °C Max. number of revolutions: 1 Error limits: ± 0.2 ° Type of mounting shaft: Solid shaft Electrical interface: SSI/Gray Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Max. number of steps per revolution: 4,096 Mass: 0.26 kg Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Resistance to shocks: 50 g, 6 ms (according to EN 60068-2-27) Mechanical interface: Solid shaft, Servo flange Connection type: Connector M23, 12-pin, radial