AFS60E-BDAA004096

Specification: Part Number 1038040 SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Initialization time: 50 ms Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Max. angular acceleration: 500,000 rad/s² Maximum operating speed: 6,000 /min Code sequence: CW/CCW, parameter adjustable Resistance to shocks: 50 g, 6 ms (according to EN 60068-2-27) Measuring step deviation: ± 0.2 ° Max. number of revolutions: 1 Bearing lifetime: 3.0 x 10^9 revolutions Electrical interface: SSI/Gray Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Repeat accuracy: 0.002 ° Type of mounting shaft: Blind hollow shaft Mechanical interface: Blind hollow shaft Mass: 0.2 kg Moment of inertia of the rotor: 40 gcm² Working temperature range: 0 °C ... 85 °C CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Resolution power: 4,096 x 1 Code type: Gray Max. number of steps per revolution: 4,096 MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Operating torque: 0.6 Ncm (20 °C) Clock frequency: 1 MHz Measuring step: 0.09 ° 360 ° / number of steps Shaft diameter: 10 mm Connection type: Connector M23, 12-pin, radial Error limits: ± 0.3 ° Reverse polarity protection: 1 Storage temperature range: -40 °C ... 100 °C, without package EMC: (according to EN 61000-6-2 and EN 61000-6-3) Interface signals: Clock +, Clock -, Data +, Data- Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Operating voltage range: 4.5 V DC ... 32 V DC Start up torque: 0.8 Ncm (20 °C) Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Power consumption: 0.5 W (without load)