AFM60E-S1AM004096

Specification: Part Number 1037652 Max. number of steps per revolution: 4,096 Mechanical interface: Solid shaft, Servo flange Power consumption: 0.5 W (without load) Repeat accuracy: 0.002 ° Measuring step: 0.09 ° 360 ° / number of steps Connection type: Cable, 8-wire, universal, 5 m Bearing lifetime: 3.0 x 10^9 revolutions Permissible Load capacity of shaft: 40 N (axial), 80 N (radial) Measuring step deviation: ± 0.2 ° Moment of inertia of the rotor: 6.2 gcm² Code type: Gray Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Maximum operating speed: 9,000 /min Start up torque: 0.5 Ncm (+20 °C) SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Interface signals: Clock +, Clock -, Data +, Data- Storage temperature range: -40 °C ... +100 °C, without package Shaft diameter: 6 mm CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Working temperature range: 0 °C ... +85 °C Initialization time: 50 ms MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Operating voltage range: 4.5 V DC ... 32 V DC Max. angular acceleration: 500,000 rad/s² Resolution power: 4,096 x 4,096 Resistance to shocks: 50 g, 6 ms (according to EN 60068-2-27) Resolution: 12 bit x 12 bit Clock frequency: 1 MHz Max. number of revolutions: 4,096 Error limits: ± 0.2 ° Reverse polarity protection: 1 Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Operating torque: 0.3 Ncm (+20 °C) Code sequence: CW/CCW, parameter adjustable EMC: (according to EN 61000-6-2 and EN 61000-6-3) Electrical interface: SSI/Gray