AFM60A-TESA262144

Specification: Part Number 1054231 Interface signals: Clock +, Clock -, Data +, Data-, Sin +, Sin - , Cos + , Cos -: analog, differential Code sequence: CW/CCW, parameter adjustable Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.05 mm Error limits: ± 0.03 ° MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Max. number of steps per revolution: 262,144 Load resistance min.: 120 &;937; CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Code type: Gray Maximum output frequency: 200 kHz Mechanical interface: Through hollow shaft Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Bearing lifetime: 3.0 x 10^9 revolutions Max. number of revolutions: 4,096 Type of mounting shaft: Through hollow shaft Electrical interface: SSI/Gray + Sin/Cos, 1.024 Perioden, programmable Max. angular acceleration: 500,000 rad/s² Signal offset: 2.5 V ± 10 % Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.01 mm Mass: 0.2 kg Measuring step deviation: ± 0.002 ° Connection type: Connector M23, 12-pin, radial Shaft diameter: 12 mm Storage temperature range: -40 °C ... 100 °C, without package Resolution power: 262,144 x 4,096 SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Initialization time: 50 ms Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Resolution: 18 bit x 12 bit Operating voltage range: 4.5 V DC ... 32 V DC Operating torque: 0.6 Ncm (20 °C) Reverse polarity protection: 1 Repeat accuracy: 0.002 ° Moment of inertia of the rotor: 40 gcm² Power consumption: 0.5 W (without load) Maximum operating speed: 9,000 /min Signal before differential generation: ± 20 % Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side Clock frequency: 2 MHz EMC: (according to EN 61000-6-2 and EN 61000-6-3) Working temperature range: -30 °C ... 100 °C Start up torque: 0.8 Ncm (20 °C)