AFM60A-TDAA262144

Specification: Part Number AFM60A-TDAA262144 Repeat accuracy: 0.002 ° Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side Working temperature range: -30 °C ... 100 °C Mechanical interface: Through hollow shaft Clock frequency: 2 MHz SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Mass: 0.2 kg Reverse polarity protection: 1 Measuring step deviation: ± 0.002 ° Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Operating torque: 0.6 Ncm (20 °C) EMC: (according to EN 61000-6-2 and EN 61000-6-3) Maximum operating speed: 9,000 /min Operating voltage range: 4.5 V DC ... 32 V DC Max. number of revolutions: 4,096 Type of mounting shaft: Through hollow shaft Measuring step: 0.014 ° 360 ° / number of steps Electrical interface: SSI/Gray Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Code type: Gray Error limits: ± 0.03 ° Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Bearing lifetime: 3.0 x 10^9 revolutions Start up torque: 0.8 Ncm (20 °C) Storage temperature range: -40 °C ... 100 °C, without package Connection type: Connector M23, 12-pin, radial Resolution: 18 bit x 12 bit Resolution power: 262,144 x 4,096 Max. angular acceleration: 500,000 rad/s² Code sequence: CW/CCW, parameter adjustable Shaft diameter: 10 mm MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.01 mm Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.05 mm Moment of inertia of the rotor: 40 gcm² Initialization time: 50 ms Power consumption: 0.5 W (without load) Max. number of steps per revolution: 262,144 Interface signals: Clock +, Clock -, Data +, Data- CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V)