AFM60A-THPC262144

Specification: Part Number AFM60A-THPC262144 MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.05 mm Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.01 mm Power consumption: 0.5 W (without load) Code sequence: CW/CCW, parameter adjustable Type of mounting shaft: Through hollow shaft Maximum operating speed: 9,000 /min Mass: 0.2 kg Resistance to shocks: 60 g, 6 ms (according to EN 60068-2-27) Connection type: Male connector M12, 8-pin, radial Repeat accuracy: 0.002 ° Storage temperature range: -40 °C ... 100 °C, without package Max. angular acceleration: 500,000 rad/s² Resolution power: 262,144 x 4,096 Interface signals: Clock +, Clock -, Data +, Data- Operating voltage range: 4.5 V DC ... 32 V DC Mechanical interface: Through hollow shaft Measuring step deviation: ± 0.002 ° Code type: Gray Max. number of steps per revolution: 262,144 Working temperature range: -30 °C ... 100 °C EMC: (according to EN 61000-6-2 and EN 61000-6-3) Measuring step: 0.014 ° 360 ° / number of steps Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Clock frequency: 2 MHz Error limits: ± 0.03 ° SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Enclosure rating: IP 65 (according to IEC 60529), housing side, IP 65 (according to IEC 60529), shaft side Bearing lifetime: 3.0 x 10^9 revolutions Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Start up torque: 0.8 Ncm (20 °C) Operating torque: 0.6 Ncm (20 °C) CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Initialization time: 50 ms Shaft diameter: 15 mm Reverse polarity protection: 1 Max. number of revolutions: 4,096 Electrical interface: SSI/Gray, programmable Resolution: 18 bit x 12 bit Moment of inertia of the rotor: 40 gcm²