V20W-0101000

Specification: Part Number 1042027 Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Safe state in the event of a fault: At least one OSSD is in the OFF state. External device monitoring (delivery status): Deactivated TM (mission time): 20 a (EN ISO 13849) Optical field of view size: 1 m x 1 m 1.2 m x 1.2 m 1.5 m x 1.5 m Teach/sync: + Connection type: Male connector M12, 8-pin Protection class: III (EN 50178) Resolution: 20 mm, 24 mm, 30 mm Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Restart interlock: + Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Type: Type 2 (IEC 61496) Status display: LEDs External device monitoring (EDM): + Enclosure rating: IP 54 (EN 60529) Diagnostic display: LEDs Aspect ratio protective field: 1:1 to 2:1 Performance level: PL c (EN ISO 13849) Air humidity: 15 % ... 95 %, non-condensing Test rate (internal test): 50 /s (EN ISO 13849) Maximum demand rate: 30 /min (EN ISO 13849) Switching voltage HIGH: VS - 2.7 V DC ... VS Protective field range: 1.41 m (20 mm resolution) 1.7 m (24 mm resolution) 2.12 m (30 mm resolution) Weight: 355 g Type of output: 2 PNP semiconductors, short-circuit protected, cross-circuit monitored Storage temperature: -25 °C ... +70 °C Ambient operating temperature: 0 °C ... +50 °C Cascaded: + Shock resistance: 10 g, 16 ms (EN 60068-2-27) PFHd: 3.2 1E-09 (EN ISO 13849) Power consumption: ≤ 165 mA ≤ 690 mA Switching current: 6 mA ... 250 mA Response time: 20 ms Switching voltage LOW: 3.5 V DC Restart interlock (delivery status): Deactivated Housing material: Die-cast aluminum Category: Category 2 (EN ISO 13849) Dimensions (W x H x D): 93.9 mm x 50 mm x 93.9 mm