SPL-F120PPS2W04

Specification: Part Number 1047344 Minimum range: Parallel beam: &ge;0 mm Power consumption sender : 50 mA Output 1: Output 1 active, if light beam interrupted Optical light exit: Flat Dimensions (W x H x D): 25 mm x 192.4 mm x 8 mm Indication: LED Alignment aid: Without alignment aid Vibration resistance: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) Shock load: 10 g / DIN EN 60068-2-29 / 16 ms Supply voltage Vs : DC 24 V, ± 20 % Ambient light safety: Direct: &ge;100,000 lx, Indirect: &ge;150,000 lx Minimum detectable object (MDO): Parallel beam, 45 mm Output load inductive: 1 H Switching output: 1 x PNP Power consumption receiver : 50 mA Output current Imax.: 100 mA Inputs: Job LED Working range: 1.5 m Weight: 20 g Detection height: 120 mm Technology: Sender/receiver EMC: EN 60947-5-2 Connection type: Short cable with connector M8, 4-pin Ambient temperature: Operation: -25 ... +55 °C Storage: -25 ... +70 °C Protection class: III Ripple: < 5 Vpp Aluminum stabilizer: With stabilizer Cross beam/parallel beam: Parallel beam active Automatic teach: Automatic teach active Synchronization: Optical Housing material: PMMA Maximum range: 3 m Output load capacitive: 100 nF Wave length: IR 950 nm Muting function: Muting function inactive Initialization time: 1 s Switching frequency: 500 kHz Beam separation: 40 mm Number of beams: 4 Circuit protection: Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected Configuration: Without teach button with configuration software Enclosure rating: IP 65 Response time: Parallel beam 19 ms Task: Switching light grid