SPL-F120PPS1W04

Specification: Part Number 1046128 Aluminum stabilizer: Without stabilizer Automatic teach: Automatic teach active Response time: Parallel beam 19 ms Wave length: IR 950 nm Muting function: Muting function inactive Detection height: 120 mm Inputs: Job LED Weight: 20 g Output load inductive: 1 H Indication: LED Circuit protection: Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected Ambient temperature: Operation: -25 ... +55 °C Storage: -25 ... +70 °C Power consumption receiver : 50 mA Initialization time: 1 s Task: Switching light grid Technology: Sender/receiver Optical light exit: Flat Output current Imax.: 100 mA Vibration resistance: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) Power consumption sender : 50 mA Connection type: Short cable with connector M8, 4-pin EMC: EN 60947-5-2 Alignment aid: Without alignment aid Supply voltage Vs : DC 24 V, ± 20 % Protection class: III Dimensions (W x H x D): 25 mm x 192.4 mm x 8 mm Housing material: PMMA Output 1: Output 1 active, if light beam interrupted Number of beams: 4 Maximum range: 3 m Synchronization: Optical Configuration: Without teach button with configuration software Working range: 1.5 m Switching output: 1 x PNP Minimum detectable object (MDO): Parallel beam, 45 mm Output load capacitive: 100 nF Minimum range: Parallel beam: &ge;0 mm Ambient light safety: Direct: &ge;100,000 lx, Indirect: &ge;150,000 lx Enclosure rating: IP 65 Cross beam/parallel beam: Parallel beam active Shock load: 10 g / DIN EN 60068-2-29 / 16 ms Beam separation: 40 mm Switching frequency: 500 kHz Ripple: < 5 Vpp