PBT-RB6X0SGESS0AMA0Z

Specification: Part Number 6048596 Response time: < 4 ms Signal noise: &le; 0.3 % of span Rated temperature range: 0 °C ... +80 °C Adjustment accuracy of zero signal: &le; 0.5 % of span typ., &le; 0.8 % of span max. (with non-linerarity 0.5 %) Pressure port: Standard Accuracy: &le; ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), &le; ± 1 % of span (with non-linearity 0.25 %), &le; ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2)) Service life: Minimum 100 Mio. life cycles Vibration load: 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional Pressure type: Gauge pressure Protection class III: + Absolute pressure: 0 bar ... 1 bar up to 0 bar ... 25 bar Compound pressure: -1 bar ... 0 bar up to -1 bar ... +24 bar Weight sensor: Ca. 80 g Gauge pressure: 0 bar ... 1 bar up to bar ... 600 bar Hysteresis: &le; 0.16 % of span Storage temperature: -20 °C ... +80 °C Connection type: Round connector M12 x 1, 4-pin, IP 67 Output signal: 4 mA ... 20 mA Non-linearity: &le; ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) Shock load: 500 g according to IEC 60068-2-27 (mechanical shock) Medium: Liquid and gaseous media Power consumption: Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output Reference conditions: Reference conditions: According to IEC 61298-1 Ambient temperature: 0 °C ... +80 °C Relative humidity: 45 % ... 75 % Isolation voltage: 500 V DC Enclosure rating: IP 67 Non-repeatability: &le; 0.1 % of span Electrical safety: Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M Measuring range: 0 bar ... 6 bar CE-conformity: Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 Long-term drift/one-year stability: &le; 0.1 % of span according to IEC 61298-2 Internal transmission fluid: Silicone oil (only with pressure ranges < 0 bar ... 10 bar and &le; 0 bar abs ... 25 bar abs) Housing material: Stainless steel 316L Wetted parts: Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) Process connection: G ½ B according to EN 837 Process temperature: 0 °C ... +80 °C Seal: Without seal