PBT-RB040SG1SSNVMC0Z

Specification: Part Number 6038646 Shock load: 500 g according to IEC 60068-2-27 (mechanical shock) Gauge pressure: 0 bar ... 1 bar up to bar ... 600 bar Storage temperature: -20 °C ... +80 °C Output signal: 0...10 V, 3-wire Power consumption: Max. 8 mA for voltage output signal, Signal current (max. 25 mA) for current output Rated temperature range: 0 °C ... +80 °C Compound pressure: -1 bar ... 0 bar up to -1 bar ... +24 bar Vibration load: 10 g according to IEC 60068-2-6 (vibration under resonance), 20 g optional Housing material: Stainless steel 316L Response time: < 4 ms Absolute pressure: 0 bar ... 1 bar up to 0 bar ... 25 bar Wetted parts: Pressure connection: stainless steel 316L, Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) Hysteresis: &le; 0.16 % of span Enclosure rating: IP 67 Pressure type: Gauge pressure Ambient temperature: 0 °C ... +80 °C Signal noise: &le; 0.3 % of span Service life: Minimum 100 Mio. life cycles Measuring range: 0 bar ... 40 bar Pressure port: Standard Long-term drift/one-year stability: &le; 0.1 % of span according to IEC 61298-2 Non-linearity: &le; ± 0.5 % ((Best Fit Straight Line, BFSL) according to IEC 61298-2) Non-repeatability: &le; 0.1 % of span Process temperature: 0 °C ... +80 °C Reference conditions: Reference conditions: According to IEC 61298-1 CE-conformity: Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3 Isolation voltage: 500 V DC Adjustment accuracy of zero signal: &le; 0.5 % of span typ., &le; 0.8 % of span max. (with non-linerarity 0.5 %) Electrical safety: Short-circuit protection: QA towards M, Protection class: III, Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA, Reverse polarity protection: L+ towards M Internal transmission fluid: Silicone oil (only with pressure ranges < 0 bar ... 10 bar and &le; 0 bar abs ... 25 bar abs) Relative humidity: 45 % ... 75 % Seal: NBR Process connection: G ¼ A according to DIN 3852-E Connection type: Round connector M12 x 1, 4-pin, IP 67 Protection class III: + Medium: Liquid and gaseous media Weight sensor: Ca. 80 g Accuracy: &le; ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V), &le; ± 1 % of span (with non-linearity 0.25 %), &le; ± 1,0 % of Span (with non-linearity 0.5 %), (Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement according to IEC 61298-2))