MOC3ZA-KAZ34A6

Specification: Part Number 6047864 Enclosure rating terminals: IP 20 Switching capacity in accordance with AC 15: N/C: 2 A/230 V AC (EN 60947-5-1), N/O: 3 A/230 V AC (EN 60947-5-1) Measurement inputs: L1/L2/L3 Maximum switching frequency: 1,200 /h TM (mission time): 20 a (EN ISO 13849) Standstill: + Dimensions (W x H x D): 45 mm x 112 mm x 121 mm Signal contacts 53/54 (normally open contact): 3 A/250 V AC G. P. Contact service life at 230 V / 5 A (AC) cos φ = 0.5: ≥ 2 1E 05 switching operations Performance level: PL e (EN ISO 13849-1) Supply voltage semiconductor diagnostic outputs (A3/A4): 24 V DC (11 V DC ... 30 V DC) Stop category: 1 (EN 60204-1) Semiconductor application diagnostics outputs (ON, ERR): Electrically isolated supply via A3/A4, Imax = 100 mA (short-circuit protected), ON for Release, ERR for Error Nominal switching voltage: 250 V AC Hysteresis (for detection of running motor): 100 % Climate conditions according to: 25/060/04 (EN 60068-1) Safety outputs: Normally open contact (13/14, 23/24, 33/34) Mechanical life: ≥ 50 1E 06 switching operations Protection class housing: IP 40 Power consumption: 10 VA PFHd: 41 1E-09 (EN ISO 13849) Vibration resistance: (EN 60068-2-6) Safe state in the event of a fault: The N/O is open; in other words, the safety-related enabling current paths are interrupted. Measured/motor voltage: 690 V AC Category: Category 4 (EN ISO 13849-1) Voltage threshold Uan: 20 mV ... 400 mV, adjustable Standstill time ts: 0.2 s ... 6 s, adjustable For UL 508 applications only: 600 V AC Mounting: 35 mm mounting rail according to EN 60715 Safety integrity level: SIL3 (IEC 61508) SILCL3 (EN 62061) Response time: 100 ms Switching capacity in accordance with DC 13: 2 A/24 V DC (EN 60947-5-1) Contact configuration (safety contacts): 3 contacts NO, 1 contact NC Contact type: Relay, positively guided Positively guided N/C contacts: Normally closed contact (41/42) Weight: 400 g