IVC-2DR1111

Specification: Part Number 1040057 Offline support: Emulator Maximum performance: 30 Hz Connector material: Nickel plated brass Example field of view (H x W): See Field of view diagram Function (Ethernet): OPC DA Server Housing material: Anodized aluminum Ethernet: + Data store and retrieve: Images and data can be stored to and retrieved from flash and external FTP servers Vibration load: 5 g, 58 Hz ... 150 Hz Enclosure rating: IP 54 IP 65 with lens protection hood Processor: 150 MHz Operator interfaces: Application specific operator interfaces can be created using ActiveX (COM) or as web page. Included OPC server enables data exchange with e.g. SCADA systems. Weight: 505 g Serial (RS-485): 1 Connection types: M12, 4-pin female connector, D-coded (Ethernet) M12, 8-pin female connector (RS-485) M12, 8-pin male connector (power I/O) Memory: 16 MB flash, 64 MB RAM Image sensor: 1/3" CCD, electronic shutter Ripple: < 5 Vpp Protection class: II, III Optics: C or CS-mount Configuration software: IVC Studio Ambient operating temperature : 0 °C ... +50 °C Data transmission rate (Ethernet): 10/100 Mbit Supply voltage: 24 V DC± 20 % Dimensions (L x W x H): 161 mm x 60 mm x 55 mm Shock load: 15 g, 3 x 6 directions Ambient storage temperature : -20 °C ... +70 °C Spectral range: Ca. 400 nm ... 750 nm Digital inputs: 4 program controlled inputs (1 trigger input), HIGH = 10 V ... 28.8 V Digital outputs: 3 B-type program controlled outputs, Total output load < 100 mA, Trigger output Task: Inspection Measuring Positioning Power consumption: < 400 mA Without output load Protocol (Ethernet): TCP/IP, UDP, EtherNet/IP Technology: 2D Image analysis Snapshot Sensor resolution: 640 px x 480 px, 640 px x 480 px