IVC-2DM1122

Specification: Part Number 1029136 Power consumption: < 400 mA Without output load Technology: 2D Image analysis Snapshot Data store and retrieve: Images and data can be stored to and retrieved from flash and external FTP servers Connection types: M12, 4-pin female connector, D-coded (Ethernet) M12, 8-pin female connector (RS-485) M12, 8-pin male connector (power I/O) Ambient storage temperature : -20 °C ... +70 °C Dimensions (L x W x H): 161 mm x 60 mm x 55 mm Processor: 800 MHz Ripple: < 5 Vpp Image sensor: 1/3" CCD, electronic shutter Digital inputs: 4 program controlled inputs (1 trigger input), HIGH = 10 V ... 28.8 V Function (Ethernet): OPC DA Server Task: Inspection Reading Measuring Positioning Enclosure rating: IP 54 IP 65 with lens protection hood Configuration software: IVC Studio Offline support: Emulator Memory: 128 MB RAM, 16 MB flash Weight: 505 g Protocol (Ethernet): TCP/IP, UDP, EtherNet/IP Supply voltage: 24 V DC± 20 % Housing material: Anodized aluminum Ambient operating temperature : 0 °C ... +50 °C Spectral range: Ca. 400 nm ... 750 nm Sensor resolution: 1,024 px x 768 px, 1,024 px x 768 px Protection class: II, III Ethernet: + Digital outputs: 3 B-type program controlled outputs, Total output load < 100 mA, Trigger output Example field of view (H x W): See Field of view diagram Operator interfaces: Application specific operator interfaces can be created using ActiveX (COM) or as web page. Included OPC server enables data exchange with e.g. SCADA systems. Shock load: 15 g, 3 x 6 directions Maximum performance: 24 Hz Vibration load: 5 g, 58 Hz ... 150 Hz Connector material: Nickel plated brass Optics: C or CS-mount Serial (RS-485): 1 Data transmission rate (Ethernet): 10/100 Mbit