C4MT-08434ABB03FE0

Specification: Part Number 1207254 Shock resistance: 10 g, 16 ms (EN 60068-2-27) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Ambient operating temperature: -20 °C ... +55 °C Enclosure rating: IP 65 (EN 60529) Connection type: Male connector M12, 5-pin Restart interlock (delivery status): Deactivated Switching voltage LOW: 2 V DC Power consumption: ≤ 3 A TM (mission time): 20 a (EN ISO 13849) Protection class: III (EN 61140) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Scanning range: 0 m ... 4 m Ripple: ≤ 10 % Category: Category 4 (EN ISO 13849) External device monitoring (EDM): + Cable length: 700 mm Typical range: 0 m ... 5 m Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Protective field height: 840 mm Configuration method: Hard wired Storage temperature: -25 °C ... +70 °C Switching current: 300 mA Automatic beam coding: + Weight: 300 g Display elements: LEDs Restart interlock: + External device monitoring (delivery status): Deactivated Safe state in the event of a fault: At least one OSSD is in the OFF state. Cascaded: - Housing cross-section (incl. system connection): 15 mm x 32 mm Safety integrity level: SIL3 (IEC 61508) SILCL3 (EN 62061) Beam coding: + PFHd: Standalone system: 4.3  1E-09 (EN ISO 13849) Response time: ≤ 13 ms Resolution: 34 mm Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Safe SICK device communication via EFI/SDL: - Housing material: Aluminum alloy ALMGSI 0.5 Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Permitted cable length: ≤ 20 m Type: Type 4 (IEC 61496) Synchronization: Optical, without separate synchronization Performance level: PL e (EN ISO 13849) Conductor cross-section: 0.34 mm² Air humidity: 15 % ... 95 %, non-condensing