C4MT-06034ABB03FE0

Specification: Part Number 1207250 Synchronization: Optical, without separate synchronization Ambient operating temperature: -20 °C ... +55 °C Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Type: Type 4 (IEC 61496) Connection type: Male connector M12, 5-pin Cascaded: - External device monitoring (EDM): + Housing cross-section (incl. system connection): 15 mm x 32 mm Shock resistance: 10 g, 16 ms (EN 60068-2-27) TM (mission time): 20 a (EN ISO 13849) Scanning range: 0 m ... 4 m Power consumption: ≤ 3 A Conductor cross-section: 0.34 mm² Restart interlock (delivery status): Deactivated Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Switching voltage LOW: 2 V DC Response time: ≤ 13 ms Cable length: 700 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Permitted cable length: ≤ 20 m Air humidity: 15 % ... 95 %, non-condensing Enclosure rating: IP 65 (EN 60529) Protection class: III (EN 61140) Beam coding: + Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Category: Category 4 (EN ISO 13849) Storage temperature: -25 °C ... +70 °C Resolution: 34 mm Typical range: 0 m ... 5 m Switching current: 300 mA Housing material: Aluminum alloy ALMGSI 0.5 Configuration method: Hard wired Restart interlock: + Protective field height: 600 mm Automatic beam coding: + Safe state in the event of a fault: At least one OSSD is in the OFF state. Performance level: PL e (EN ISO 13849) Safe SICK device communication via EFI/SDL: - External device monitoring (delivery status): Deactivated Safety integrity level: SIL3 (IEC 61508) SILCL3 (EN 62061) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Display elements: LEDs Ripple: ≤ 10 % Weight: 215 g PFHd: Standalone system: 4.3  1E-09 (EN ISO 13849)