BTF13-P1BM3025

Specification: Part Number 1061003 Linearity: ≤ ± 2 mm Enclosure rating encoder: IP 67 Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik MTTFd: mean time to dangerous failure: 150 a (ATM60 PROFIBUS), 60 a (A3M60) Encoder: Absolute encoders Address setting: 0 ... 127, DIP switch Mass (including encoder): 6.48 kg (A3M60), 6.79 kg (A3M60) Mass (mechanics): 6.2 kg Measuring range: 0 m ... 30 m Power consumption: 1.5 W (A3M60), 2 W (ATM60 PROFIBUS) Measuring wire diameter: 0.81 mm Working temperature range (encoder): -10 °C ... +70 °C, A3M60, -20 °C ... +70 °C, ATM60 PROFIBUS Mounted encoder: A3M60, ATM60 PROFIBUS Bus termination: Via DIP switches Length of wire pulled out per revolution: 332.4 mm Mounted mechanic: MRA-F130-130D1 Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A Hysteresis: ≤ 5 mm Resolution (wire draw + encoder): 0.04 mm Supply voltage: 10 V ... 32 V Working temperature range (mechanics): -30 °C ... +70 °C Encoder profile: Encoder profile version 1.1 class 1 and class 2 (A3M60), Profil für Encoder (07hex) - Class 2 (ATM60 PROFIBUS) Part number mechanic: 6028629 Housing material, wire draw mechanism: Aluminum (anodised), plastic Initialization time: Ca. 1 s, A3M60, Ca. 12 s, ATM60 PROFIBUS EMC: (according to EN 61000-6-2 and EN 61000-6-3) Actual length of cable extension: 30.2 m Mass (measuring wire): 2.6 g/m Wire acceleration: 15 m/s² Relative humidity / Condensation: 95 % (A3M60, condensation of the optical scanning not permitted), 98 % (ATM60 PROFIBUS, condensation of the optical scanning not permitted) SET (electronic adjustment): Via PRESET push button or protocol Spring return force: 10 N ... 20 N Connection type: Connector 3 x M12, 5-pin, axial Enclosure rating mechanic: IP 64 Electrical interface: PROFIBUS Repeatability: ≤ 2 mm Part number encoder: 1051018 Life of wire draw mechanism: 1 million cycles Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Number of steps per revolution: 8,192 Protocol: PROFIBUS DP V0 (A3M60), Profil für Encoder (07hex) - Class 2 (ATM60 PROFIBUS) Operating speed: 4 m/s