AFM60E-S4AC000256

Specification: Part Number 1054309 Resolution: 8 bit x 12 bit Mass: 0.26 kg Working temperature range: 0 °C ... +85 °C Measuring step deviation: ± 0.2 ° Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Moment of inertia of the rotor: 6.2 gcm² Reverse polarity protection: 1 MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Measuring step: 0.09 ° 360 ° / number of steps Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Storage temperature range: -40 °C ... +100 °C, without package Power consumption: 0.5 W (without load) Interface signals: Clock +, Clock -, Data +, Data- Resolution power: 256 x 4,096 Code type: Gray Repeat accuracy: 0.002 ° Operating voltage range: 4.5 V DC ... 32 V DC Initialization time: 50 ms Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Maximum operating speed: 9,000 /min EMC: (according to EN 61000-6-2 and EN 61000-6-3) Max. angular acceleration: 500,000 rad/s² Clock frequency: 1 MHz Connection type: Male connector M12, 8-pin, radial Start up torque: 0.5 Ncm (+20 °C) SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Bearing lifetime: 3.0 x 10^9 revolutions Resistance to shocks: 50 g, 6 ms (according to EN 60068-2-27) Permissible Load capacity of shaft: 40 N (axial), 80 N (radial) Error limits: ± 0.2 ° Electrical interface: SSI/Gray Max. number of revolutions: 4,096 Code sequence: CW/CCW, parameter adjustable Operating torque: 0.3 Ncm (+20 °C) Max. number of steps per revolution: 256 Shaft diameter: 10 mm Mechanical interface: Solid shaft with flat, Face mount flange