AFM60E-BDLA004096

Specification: Part Number AFM60E-BDLA004096 Electrical interface: SSI/Gray + Incremental, HTL Error limits: ± 0.3 ° Working temperature range: 0 °C ... +85 °C Maximum operating speed: 6,000 /min Max. number of revolutions: 4,096 Measuring step: 90 ° elektrisch / Strichzahl Shaft diameter: 10 mm CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Storage temperature range: -40 °C ... +100 °C, without package Max. number of steps per revolution: 4,096 SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) EMC: (according to EN 61000-6-2 and EN 61000-6-3) Bearing lifetime: 3.0 x 10^9 revolutions Resolution: 12 bit x 12 bit Code type: Gray Reference signal, position: 90 °, electronically, gated with A and B Measuring step deviation: ± 0.2 ° Initialization time: 50 ms Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Clock frequency: 1 MHz Code sequence: CW/CCW, parameter adjustable Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Mechanical interface: Blind hollow shaft MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Operating voltage range: 4.5 V DC ... 32 V DC Max. angular acceleration: 500,000 rad/s² Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Operating torque: 0.6 Ncm (+20 °C) Resistance to shocks: 50 g, 6 ms (according to EN 60068-2-27) Resolution power: 4,096 x 4,096 Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Moment of inertia of the rotor: 40 gcm² Mass: 0.2 kg Start up torque: 0.8 Ncm (+20 °C) Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Connection type: Connector M23, 12-pin, radial Maximum output frequency: 300 kHz Interface signals: A, B: digital differential, Clock +, Clock -, Data +, Data- Load current max.: 30 mA Reverse polarity protection: 1 Power consumption: 0.5 W (without load) Repeat accuracy: 0.002 °