AFM60E-BEAA004096

Specification: Part Number 1054115 Initialization time: 50 ms Shaft diameter: 12 mm Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Max. angular acceleration: 500,000 rad/s² Resistance to shocks: 50 g, 6 ms (according to EN 60068-2-27) Code sequence: CW/CCW, parameter adjustable Max. number of revolutions: 4,096 Start up torque: 0.8 Ncm (+20 °C) Interface signals: Clock +, Clock -, Data +, Data- Resolution power: 4,096 x 4,096 Power consumption: 0.5 W (without load) Clock frequency: 1 MHz Reverse polarity protection: 1 Bearing lifetime: 3.0 x 10^9 revolutions Code type: Gray Maximum operating speed: 6,000 /min Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Measuring step: 0.09 ° 360 ° / number of steps SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Resolution: 12 bit x 12 bit Working temperature range: 0 °C ... +85 °C Max. number of steps per revolution: 4,096 Electrical interface: SSI/Gray CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Storage temperature range: -40 °C ... +100 °C, without package Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm EMC: (according to EN 61000-6-2 and EN 61000-6-3) Repeat accuracy: 0.002 ° Connection type: Connector M23, 12-pin, radial Operating voltage range: 4.5 V DC ... 32 V DC Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Mechanical interface: Blind hollow shaft Mass: 0.2 kg Operating torque: 0.6 Ncm (+20 °C) Moment of inertia of the rotor: 40 gcm² Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Measuring step deviation: ± 0.2 ° Error limits: ± 0.3 °