NMN10-12GM50-E2-V1-F

General specifications Switching element function PNP NO Rated operating distance 10 mm Installation non-flush Output polarity DC Assured operating distance 0 ... 8.1 mm Reduction factor r Al 1 Reduction factor r Cu 0.8 Reduction factor r 304 0.1 (0.7 of material thickness 2 mm) Reduction factor r St37 1 Nominal ratings Installation conditions A 22 mm (mild steel) 21 mm (stainless steel) 13 mm (aluminum) 15 mm (brass) B 24 mm C 30 mm F 120 mm Operating voltage 10 ... 30 V Switching frequency 0 ... 400 Hz Hysteresis 3 ... 15 typ. 5 % Reverse polarity protection yes Short-circuit protection yes Voltage drop less than or equal to 2 V Operating current 0 ... 200 mA Off-state current less than or equal to 0.1 mA No-load supply current less than or equal to 10 mA Switching state indicator LED, yellow Limit data Operating pressure statically 80 bar (1160.3 psi) max. Approvals and certificates UL approval cULus Listed, General Purpose CSA approval cCSAus Listed, General Purpose CCC approval CCC approval / marking not required for products rated less than or equal to 36 V Ambient conditions Ambient temperature -25 ... 85 °C (-13 ... 185 °F) Mechanical specifications Connection type Connector M12 x 1 , 4-pin Housing material Stainless steel 1.4435 / AISI 316L Sensing face Stainless steel 1.4435 / AISI 316L Housing diameter 12 mm Degree of protection IP68 / IP69K Mass 23 g