NJ15-30GM50-E2-V1-3G-3D

General specifications Switching element function PNP NO Rated operating distance 15 mm Installation non-flush Output polarity DC Assured operating distance 0 ... 12.15 mm Reduction factor r Al 0.4 Reduction factor r Cu 0.38 Reduction factor r 304 0.71 Reduction factor r Brass 0.45 Nominal ratings Operating voltage 10 ... 60 V DC Switching frequency 0 ... 500 Hz Hysteresis 1 ... 15 typ. 5 % Reverse polarity protection reverse polarity protected Short-circuit protection pulsing Voltage drop less than or equal to 2.8 V Operating current 0 ... 200 mA Off-state current 0 ... 0.5 mA typ. 0.01 mA No-load supply current less than or equal to 9 mA Switching state indicator LED, yellow Approvals and certificates UL approval cULus Listed, General Purpose CSA approval cCSAus Listed, General Purpose CCC approval Certified by China Compulsory Certification (CCC) Ambient conditions Ambient temperature -25 ... 70 °C (-13 ... 158 °F) Storage temperature -25 ... 85 °C (-13 ... 185 °F) Mechanical specifications Connection type Connector M12 x 1 , 4-pin Core cross-section - Housing material Stainless steel 1.4305 / AISI 303 Sensing face PBT Housing diameter 30 mm Degree of protection IP67 General information Use in the hazardous area see instruction manuals Category 3G- 3D