X 700 - Profibus

Shaft type ø10 mm solid shaft (clamping flange) Voltage supply 10...30 VDC Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Initializing time typ. 250 ms after power on Protection DIN EN 60529 IP 67 Size (flange) ø70 mm Starting acceleration ≤1000 U/s² Code sequence CW/CCW programmable Device adress Rotary switch in bus cover Operating speed ≤6000 rpm (mechanical) ≤6000 rpm (electric) Consumption w/o load ≤100 mA (24 VDC) manufacter SKU X 700 - Profibus Starting torque ≤0.4 Nm Sensing method Optical Weight approx. 1500 g Materials Housing: stainless steel Flange: stainless steel Code Binary Operating temperature -25...+60 °C Reverse polarity protection Yes Emitted interference DIN EN 61000-6-4 Steps per turn ≤8192 / 13 bit Diagnostic functions Position or parameter error Multiturn sensing Explosion protection Ex II 2G Ex d IIC T6 Ex II 2D Flange Clamping flange Admitted shaft load ≤60 N axial ≤50 N radial Interface Profibus-DPV0 Relative humidity 95 % non-condensing Number of turns ≤65536 / 16 bit Absolute accuracy ±0.025 ° Connection Bus cover Programmable parameters Operating modes Total resolution Scaling Rotation speed monitoring Function Multiturn Interference immunity DIN EN 61000-6-2