HS35P - Programmable

Output frequency ≤300 kHz (TTL) ≤160 kHz (HTL) ≤160 kHz (OC) Materials Housing: aluminium, powder-coated Shaft: stainless steel Protection DIN EN 60529 IP 54 IP 65 IP 67 Bore runout 0.0016" (0.04 mm) TIR max. HS35P - Programmable output signals A, B, Z A, B, Z + complement, ½ cycle index gated with negative B channel Operating speed ≤5000 rpm (see temperature diagram) Operating temperature -40...+212 °F (-40...+100 °C), (fixed cable): see temperature diagram Sensing method Optical Resistance DIN EN 60068-2-6 Vibration 20 g, 60-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Pulses per revolution 1...8192 Approvals UL approval / file no. E240061 ROHS compliant EU guideline 2011/65/EC CE Relative humidity 98 % non-condensing Service life Bearing: typ. 13 billion rev. (89000 h/2500 rpm) Bearing 52100 SAE high carbon steel (ABEC 5) Interference immunity DIN EN 61000-6-2 Admitted misalignment 0.004" (0.1016 mm) radial TIR (end of shaft) 0.01" (0.254 mm) axial Size (flange) ø3.15" (ø80 mm) Emitted interference DIN EN 61000-6-3 manufacter SKU HS35P - Programmable Starting torque ≤3 in-oz (77 °F, IP 65) ≤0.02 Nm (+25 °C, IP 65) Voltage supply 4.75...30 VDC Consumption w/o load ≤50 mA (24 VDC) ≤180 mA (5 VDC) + output load, max. 250 mA Weight approx. 23 oz. 660 g Programmable parameters Output resolution in increments of one (can be different for A and B) Output level TTL/HTL Zero pulse width and position Rotational direction CW/CCW Shaft type ø0.375...1" (ø9.525...25.4 mm) (through hollow shaft isolated) Rotor moment of inertia 2.3 oz-in² (420 gcm²) Output stages Linedriver (TTL, 7272) Vout = 5 V, short-circuit proof Push-pull (HTL, 7272) Vout = Vin, short-circuit proof Open Collector (OC, 7273) Vout = Vin, short-circuit proof Reverse polarity protection Yes Connection MIL-connector, 7-pin MIL-connector, 10-pin Cable (AWG26 wire)