SPL-S440PPS2W04

Specification: Part Number 1045018 Switching output: 1 x PNP EMC: EN 60947-5-2 Indication: LED Cross beam/parallel beam: Parallel beam active Technology: Sender/receiver Minimum detectable object (MDO): Parallel beam, 45 mm Initialization time: 1 s Optical light exit: Slim Synchronization: Optical Ambient light safety: Direct: &ge;100,000 lx, Indirect: &ge;150,000 lx Shock load: 10 g / DIN EN 60068-2-29 / 16 ms Dimensions (W x H x D): 25 mm x 512.4 mm x 8 mm Response time: Parallel beam 19 ms Output load capacitive: 100 nF Protection class: III Vibration resistance: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) Inputs: Job LED Ambient temperature: Operation: -25 ... +55 °C Storage: -25 ... +70 °C Minimum range: Parallel beam: &ge;0 mm Output load inductive: 1 H Ripple: < 5 Vpp Number of beams: 12 Maximum range: 3 m Automatic teach: Automatic teach active Circuit protection: Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected Working range: 1.5 m Housing material: PMMA Enclosure rating: IP 65 Power consumption sender : 50 mA Task: Switching light grid Output current Imax.: 100 mA Supply voltage Vs : DC 24 V, ± 20 % Output 1: Output 1 active, if light beam interrupted Switching frequency: 500 kHz Beam separation: 40 mm Aluminum stabilizer: With stabilizer Configuration: Without teach button with configuration software Connection type: Short cable with connector M8, 4-pin Muting function: Muting function inactive Detection height: 440 mm Wave length: IR 950 nm Power consumption receiver : 50 mA Weight: 60 g Alignment aid: Without alignment aid