Specification: Part Number 1045016 Alarm output 2: Alarm output at output 2 inactive Minimum detectable object (MDO): Parallel beam, 85 mm Enclosure rating: IP 65 Switching frequency: 250 kHz Configuration: Without teach button with configuration software Supply voltage Vs : DC 24 V, ± 20 % EMC: EN 60947-5-2 Detection height: 1,040 mm Muting function output 2: With muting function at output 2 Cross beam/parallel beam: Parallel beam active Beam separation: 80 mm Maximum range: 10 m Aluminum stabilizer: Without stabilizer Task: Switching light grid Output load capacitive: 100 nF Weight: 140 g Power consumption receiver : 70 mA Ripple: < 5 Vpp Output 2: Output 2 active, if light beam interrupted Optical light exit: Slim Housing material: PMMA Alignment aid: Without alignment aid Power consumption sender : 124 mA Output load inductive: 1 H Muting function: Muting function active Connection type: Short cable with connector M8, 4-pin Initialization time: 1 s Synchronization: Optical Ambient light safety: Direct: ≥100,000 lx, Indirect: ≥150,000 lx Technology: Sender/receiver Vibration resistance: 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) Protection class: III Wave length: IR 950 nm Shock load: 10 g / DIN EN 60068-2-29 / 16 ms Indication: LED Dimensions (W x H x D): 25 mm x 1,112.4 mm x 8 mm Ambient temperature: Operation: -25 ... +55 °C Storage: -25 ... +70 °C Circuit protection: Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected Output 1: Output 1 active, if light beam interrupted Number of beams: 14 Switching output: 2 x PNP Response time : Parallel beam coded version 38 ms Output current Imax.: 100 mA Automatic teach: Automatic teach active Working range: 7 m Minimum range: Parallel beam: ≥0 mm