DFS60E-BGEC00200

Specification: Part Number 1037796 Start up torque: 0.8 Ncm (+20 °C) Operating voltage range: 10 V ... 32 V Resistance to shocks: 50 g (according to EN 60068-2-27) Measuring step: 90 ° / electronically/number of lines Mechanical interface: Blind hollow shaft Maximum operating speed: 6,000 /min Reference signal, number: 1 Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Load current max.: 30 mA Reference signal, position: 90 °, electronically, gated with A and B Bearing lifetime: 3.6 x 10^10 revolutions Mass: 0.2 kg Shaft diameter: 14 mm Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Pulses per revolution: 200 Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Working temperature range: 0 °C ... +85 °C MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) Initialization time: 40 ms Operating torque: 0.6 Ncm (+20 °C) Max. angular acceleration: 500,000 rad/s² Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Connection type: Male connector M12, 8-pin, radial Electrical interface: 10 V ... 32 V, HTL/Push pull, Connector M12, 8-pin, radial Moment of inertia of the rotor: 40 gcm² Maximum output frequency: 300 kHz Shaft material: Metal EMC: (according to EN 61000-6-2 and EN 61000-6-3) Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Power consumption: 0.5 W (without load) Error limits: ± 0.3 ° Measuring step deviation: ± 0.2 ° Storage temperature range: -40 °C ... +100 °C, without package