Specification: Part Number 1038156 EMC: (according to EN 61000-6-2 and EN 61000-6-3) Bearing lifetime: 3.6 x 10^10 revolutions Pulses per revolution: 10,000 Operating voltage range: 10 V ... 32 V Resistance to shocks: 70 g (according to EN 60068-2-27) Reference signal, number: 1 Moment of inertia of the rotor: 40 gcm² Error limits: ± 0.05 ° Mechanical interface: Blind hollow shaft Mass: 0.2 kg Load current max.: 30 mA Working temperature range: -30 °C ... +100 °C Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Operating torque: 0.6 Ncm (+20 °C) Measuring step: 90 ° / electronically/number of lines Initialization time: 40 ms MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) Maximum operating speed: 6,000 /min Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Power consumption: 0.5 W (without load) Maximum output frequency: 600 kHz Electrical interface: 10 V ... 32 V, TTL/RS422, Cable, 8-pin, universal, 3 m Shaft material: Metal Connection type: Cable, 8-wire, universal, 3 m Start up torque: 0.8 Ncm (+20 °C) Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Shaft diameter: 14 mm Reference signal, position: 90 °, electronically, gated with A and B Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Max. angular acceleration: 500,000 rad/s² Storage temperature range: -40 °C ... +100 °C, without package Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side