DBS50E-S5EP02500

Specification: Part Number 1065403 Housing material: Aluminum EMC: (according to EN 61000-6-2 and EN 61000-6-4 (class A)) Flange material: Aluminum Connection type: Cable, 8-pin with male connector M12, universal, 0.5 m Error limits: ± 54 ° (/pulses per revolution) Pulses per revolution: 2,500 Initialization time: < 3 ms Reverse polarity protection: 1 Bearing lifetime: 2 x 10^9 revolutions Operating torque: 0.6 Ncm (+20 °C) Reference signal, number: 1 Mechanical interface: Solid shaft, Face mount flange Short-circuit protection of the outputs: 1 Resistance to shocks: 100 g (EN 60068-2-27) Working temperature range: -20 °C ... +85 °C Measuring step: 90 ° / electronically/pulses Load current max.: 30 mA Maximum operating speed: 8,000 U/min Storage temperature range: -40 °C ... +100 °C, without package Max. angular acceleration: 500,000 rad/s² Shaft material: Stainless steel Start up torque: 0.9 Ncm (+20 °C) Power consumption max. without load: 0.5 W, Without load Permissible shaft loading radial/axial: 30 N (axial), 50 N (radial) Enclosure rating: IP 65 MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) Duty cycle: &le; 0.5 ± 5 % Moment of inertia of the rotor: 0.65 gcm² Shaft diameter: 8 mm x 15.5 m Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) Measuring step deviation: ± 18 ° / impulses per relovution Electrical interface: 7 V ... 30 V, HTL/Push pull Maximum output frequency: 300 kHz Reference signal, position: 90 °, electronically, gated with A and B Operating voltage range: 7 V ... 30 V Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Operating speed: 6,000 /min Material, cable: PVC