DBS36E-S3EP00500

Specification: Part Number 1064490 Mechanical interface: Solid shaft, Face mount flange Reverse polarity protection: 1 Shaft diameter: 6 mm x 12 mm Material, cable: PVC Permissible shaft loading radial/axial: 20 N (axial), 40 N (radial) Measuring step deviation: ± 18 ° / impulses per relovution Flange material: Aluminum Start up torque: 0.5 Ncm (+20 °C) Connection type: Cable, 8-pin with male connector M12, universal, 0.5 m Measuring step: 90 ° / electronically/pulses Housing material: Aluminum Resistance to shocks: 100 g (EN 60068-2-27) Electrical interface: 7 V ... 30 V, HTL/Push pull Moment of inertia of the rotor: 0.6 gcm² Power consumption max. without load: Without load Operating voltage range: 7 V ... 30 V Working temperature range: -20 °C ... +85 °C Operating torque: 0.4 Ncm (+20 °C) Shaft material: Stainless steel Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Maximum output frequency: 300 kHz Maximum operating speed: 8,000 U/min Reference signal, number: 1 EMC: (according to EN 61000-6-2 and EN 61000-6-4 (class A)) Pulses per revolution: 500 Initialization time: < 3 ms Enclosure rating: IP 65 Load current max.: 30 mA Operating speed: 6,000 /min Reference signal, position: 90 °, electronically, gated with A and B Error limits: ± 54 ° (/pulses per revolution) Max. angular acceleration: 500,000 rad/s² Short-circuit protection of the outputs: 1 MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) Storage temperature range: -40 °C ... +100 °C, without package Operating power consumption (no load): 50 mA Duty cycle: &le; 0.5 ± 5 % Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) Bearing lifetime: 2 x 10^9 revolutions