Specification: Part Number 1062691 Maximum output frequency: 300 kHz Start up torque: 0.5 Ncm (+20 °C) Moment of inertia of the rotor: 0.6 gcm² Working temperature range: -20 °C ... +85 °C Short-circuit protection of the outputs: 1 Housing material: Aluminum Duty cycle: ≤ 0.5 ± 5 % Shaft diameter: 6 mm x 12 mm MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Measuring step: 90 ° / electronically/pulses Maximum operating speed: 8,000 U/min Operating voltage range: 7 V ... 30 V Material, cable: PVC Resistance to shocks: 100 g (EN 60068-2-27) Pulses per revolution: 2,000 Permissible shaft loading radial/axial: 20 N (axial), 40 N (radial) Operating power consumption (no load): 50 mA Reference signal, number: 1 Power consumption max. without load: < 0.5 W (without load) Mechanical interface: Solid shaft, Face mount flange Initialization time: < 3 ms Bearing lifetime: 2 x 10^9 revolutions Storage temperature range: -40 °C ... +100 °C, without package Mass: 150 g (with connecting cable) Load current max.: 30 mA Shaft material: Stainless steel Operating torque: 0.4 Ncm (+20 °C) Reverse polarity protection: 1 Measuring step deviation: ± 18 ° / impulses per relovution Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) Reference signal, position: 90 °, electronically, gated with A and B Operating speed: 6,000 /min Electrical interface: 7 V ... 30 V, HTL/Push pull EMC: (according to EN 61000-6-2 and EN 61000-6-4 (class A)) Error limits: ± 54 ° (/pulses per revolution) Connection type: Cable, 8-wire, universal, 1.5 m Enclosure rating: IP 65 Flange material: Aluminum Max. angular acceleration: 500,000 rad/s²