DBS36E-BBEP02000

Specification: Part Number 1068934 Enclosure rating: IP 65 Shaft diameter: 8 mm Operating voltage range: 7 V ... 30 V Load current max.: 30 mA Pulses per revolution: 2,000 Material, cable: PVC Working temperature range: -20 °C ... +85 °C Initialization time: < 3 ms Duty cycle: &le; 0.5 ± 5 % Start up torque: 0.5 Ncm (+20 °C) Connection type: Cable, 8-pin with male connector M12, universal, 0.5 m Power consumption max. without load: < 0.5 W (without load) Reference signal, position: 90 °, electronically, gated with A and B EMC: (according to EN 61000-6-2 and EN 61000-6-4 (class A)) Reference signal, number: 1 Maximum output frequency: 300 kHz Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) Bearing lifetime: 2 x 10^9 revolutions Measuring step deviation: ± 18 ° / impulses per relovution Reverse polarity protection: 1 Maximum operating speed: 8,000 U/min Storage temperature range: -40 °C ... +100 °C, without package Housing material: Aluminum Operating speed: 6,000 /min Resistance to shocks: 100 g (EN 60068-2-27) Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Shaft material: Stainless steel Max. angular acceleration: 500,000 rad/s² Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm MTTFd: mean time to dangerous failure: 600 a (EN ISO 13849-1) Error limits: ± 54 ° (/pulses per revolution) Flange material: Aluminum Moment of inertia of the rotor: 0.8 gcm² Operating torque: 0.4 Ncm (+20 °C) Short-circuit protection of the outputs: 1 Electrical interface: 7 V ... 30 V, HTL/Push pull Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Measuring step: 90 ° / electronically/pulses Mechanical interface: Blind hollow shaft