BTF08-P1BM0241

Specification: Part Number 1060966 Part number mechanic: 6028625 Connection type: Connector 3 x M12, 5-pin, axial Working temperature range (combination): Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik Mass (measuring wire): 7.1 g/m Wire acceleration: 40 m/s² Working temperature range (mechanics): -30 °C ... +70 °C Length of wire pulled out per revolution: 200 mm Electrical interface: PROFIBUS Part number encoder: 1051018 Life of wire draw mechanism: 1 million cycles MTTFd: mean time to dangerous failure: 150 a (ATM60 PROFIBUS), 60 a (A3M60) Number of steps per revolution: 8,192 Mass (including encoder): 1.58 kg (A3M60), 1.89 kg (A3M60) Actual length of cable extension: 2.2 m Enclosure rating mechanic: IP 64 EMC: (according to EN 61000-6-2 and EN 61000-6-3) Mass (mechanics): 1.3 kg Initialization time: Ca. 1 s, A3M60, Ca. 12 s, ATM60 PROFIBUS Measuring wire diameter: 1.35 mm Enclosure rating encoder: IP 67 Working temperature range (encoder): -10 °C ... +70 °C, A3M60, -20 °C ... +70 °C, ATM60 PROFIBUS Power consumption: 1.5 W (A3M60), 2 W (ATM60 PROFIBUS) Operating speed: 4 m/s Mounted encoder: A3M60, ATM60 PROFIBUS Resolution (wire draw + encoder): 0.02 mm Protocol: PROFIBUS DP V0 (A3M60), Profil für Encoder (07hex) - Class 2 (ATM60 PROFIBUS) SET (electronic adjustment): Via PRESET push button or protocol Repeatability: ≤ 1 mm Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Mounted mechanic: MRA-F080-102D2 Address setting: 0 ... 127, DIP switch Encoder: Absolute encoders Bus termination: Via DIP switches Hysteresis: ≤ 2 mm Supply voltage: 10 V ... 32 V Encoder profile: Encoder profile version 1.1 class 1 and class 2 (A3M60), Profil für Encoder (07hex) - Class 2 (ATM60 PROFIBUS) Linearity: ≤ ± 2 mm Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A Relative humidity / Condensation: 95 % (A3M60, condensation of the optical scanning not permitted), 98 % (ATM60 PROFIBUS, condensation of the optical scanning not permitted) Spring return force: 6 N ... 14 N Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Measuring range: 0 m ... 2 m Housing material, wire draw mechanism: Aluminum (anodised), die-cast zinc