ATM60-AAM12X12

Specification: Part Number 1030012 Storage temperature range: -40 °C ... +100 °C, without package Parameterising data: Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Enclosure rating: IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 65 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal Mass: 0.4 kg Code type: Binary, Gray Max. angular acceleration: 500,000 rad/s² EMC: (according to EN 61000-6-2 and EN 61000-6-3) Permissible relative humidity: 98 % MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Moment of inertia of the rotor: 55 gcm² Initialization time: 1,050 ms Clock frequency: 1 MHz Interface signals: Clock +, Clock -, Data +, Data-, Programming interface: RS-422 Power consumption max. without load: 0.8 W SET (electronic adjustment): H-active (L &;8801; 0 - 4,7 V, H &;8801; 10 - Us V) Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Code sequence: CW/CCW Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Resolution power: 4,096 x 4,096 Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Bearing lifetime: 3.6 x 10^9 revolutions Error limits: ± 0.25 ° Working temperature range: -20 °C ... +85 °C Resolution: 12 bit x 12 bit Start up torque with shaft seal: 1.2 Ncm Shaft diameter: 6 mm, 1/4 " 8 mm, 3/8 " 10 mm, 1/2 " 12 mm 14 mm 15 mm Max. number of steps per revolution: 4,096 Electrical interface: SSI Mechanical interface: Blind hollow shaft Housing material: Die-cast aluminum Shaft material: Stainless steel Connection type: Cable, 12-pin, radial, 5 m Max. number of revolutions: 4,096 Measuring step: 0.043 ° Operating voltage range: 10 V ... 32 V Flange material: Aluminum Repeat accuracy: 0.1 ° Operating torque with shaft seal: 0.8 Ncm