AFS60B-BDAC032768

Specification: Part Number 1038070 Start up torque: 0.8 Ncm (20 °C) Operating voltage range: 4.5 V DC ... 32 V DC Shaft diameter: 10 mm SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm Operating torque: 0.6 Ncm (20 °C) EMC: (according to EN 61000-6-2 and EN 61000-6-3) Power consumption: 0.5 W (without load) Resistance to shocks: 70 g, 6 ms (according to EN 60068-2-27) Type of mounting shaft: Blind hollow shaft Maximum operating speed: 6,000 /min Measuring step deviation: ± 0.01 ° Max. angular acceleration: 500,000 rad/s² Connection type: Male connector M12, 8-pin, radial Error limits: ± 0.05 ° Moment of inertia of the rotor: 40 gcm² Initialization time: 50 ms MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Electrical interface: SSI/Gray Mass: 0.2 kg Bearing lifetime: 3.0 x 10^9 revolutions Storage temperature range: -40 °C ... 100 °C, without package CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Clock frequency: 2 MHz Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Measuring step: 0.01 ° Interface signals: Clock +, Clock -, Data +, Data- Max. number of revolutions: 1 Working temperature range: -30 °C ... 100 °C Code sequence: CW/CCW, parameter adjustable Mechanical interface: Blind hollow shaft Repeat accuracy: 0.002 ° Max. number of steps per revolution: 32,768 Code type: Gray Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Reverse polarity protection: 1 Resolution power: 32,768 x 1