AFM60E-S4AC001024

Specification: Part Number 1053162 Maximum operating speed: 9,000 /min Operating torque: 0.3 Ncm (+20 °C) Mass: 0.26 kg Moment of inertia of the rotor: 6.2 gcm² Shaft diameter: 10 mm Code sequence: CW/CCW, parameter adjustable Max. number of revolutions: 4,096 Max. number of steps per revolution: 1,024 Bearing lifetime: 3.0 x 10^9 revolutions Working temperature range: 0 °C ... +85 °C Mechanical interface: Solid shaft with flat, Face mount flange Start up torque: 0.5 Ncm (+20 °C) Error limits: ± 0.2 ° Resolution: 10 bit x 12 bit Measuring step deviation: ± 0.2 ° Interface signals: Clock +, Clock -, Data +, Data- Clock frequency: 1 MHz Initialization time: 50 ms EMC: (according to EN 61000-6-2 and EN 61000-6-3) CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Power consumption: 0.5 W (without load) Operating voltage range: 4.5 V DC ... 32 V DC Storage temperature range: -40 °C ... +100 °C, without package Measuring step: 0.09 ° 360 ° / number of steps Resolution power: 1,024 x 4,096 Max. angular acceleration: 500,000 rad/s² MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Code type: Gray Connection type: Male connector M12, 8-pin, radial Electrical interface: SSI/Gray Permissible Load capacity of shaft: 40 N (axial), 80 N (radial) Resistance to shocks: 50 g, 6 ms (according to EN 60068-2-27) Reverse polarity protection: 1 Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Repeat accuracy: 0.002 °