AFM60B-S4RA032768

Specification: Part Number 1052833 Mechanical interface: Solid shaft with flat, Face mount flange Permissible Load capacity of shaft: 40 N (axial), 80 N (radial) Initialization time: 50 ms Operating torque: 0.3 Ncm (20 °C) Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Max. number of revolutions: 4,096 Max. angular acceleration: 500,000 rad/s² Moment of inertia of the rotor: 6.2 gcm² Load current max.: 30 mA Repeat accuracy: 0.002 ° Working temperature range: -30 °C ... 100 °C Maximum operating speed: 9,000 /min Storage temperature range: -40 °C ... 100 °C, without package Max. number of steps per revolution: 32,768 Interface signals: A, B: digital differential, Clock +, Clock -, Data +, Data- Error limits: ± 0.05 ° Start up torque: 0.5 Ncm (20 °C) Mass: 0.26 kg CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Shaft diameter: 10 mm Electrical interface: Connector M23, 12-pin, radial Resistance to shocks: 70 g (according to EN 60068-2-27) Maximum output frequency: 600 kHz Clock frequency: 2 MHz Bearing lifetime: 3.0 x 10^9 revolutions SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Power consumption: 0.5 W (without load) Resolution power: 32,768 x 4,096 Reference signal, position: 90 °, electronically, gated with A and B EMC: (according to EN 61000-6-2 and EN 61000-6-3) Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Operating voltage range: 4.5 V DC ... 32 V DC Resolution: 15 bit x 12 bit MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Measuring step deviation: ± 0.01 ° Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Measuring step: 90 ° elektrisch / Strichzahl