AFM60B-S1AC008192

Specification: Part Number 1037863 Shaft diameter: 6 mm MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Max. number of steps per revolution: 8,192 Operating voltage range: 4.5 V DC ... 32 V DC Mass: 0.26 kg EMC: (according to EN 61000-6-2 and EN 61000-6-3) Interface signals: Clock +, Clock -, Data +, Data- Initialization time: 50 ms Clock frequency: 2 MHz Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Power consumption: 0.5 W (without load) Max. number of revolutions: 4,096 Error limits: ± 0.05 ° Max. angular acceleration: 500,000 rad/s² Storage temperature range: -40 °C ... 100 °C, without package Operating torque: 0.3 Ncm (20 °C) Repeat accuracy: 0.002 ° Resolution power: 8,192 x 4,096 Working temperature range: -30 °C ... 100 °C Moment of inertia of the rotor: 6.2 gcm² Bearing lifetime: 3.0 x 10^9 revolutions Measuring step deviation: ± 0.01 ° SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side Maximum operating speed: 9,000 /min Measuring step: 0.01 ° Permissible Load capacity of shaft: 40 N (axial), 80 N (radial) Resolution: 13 bit x 12 bit CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Resistance to shocks: 70 g (according to EN 60068-2-27) Electrical interface: Connector M12, 8-pin, radial Start up torque: 0.5 Ncm (20 °C) Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Mechanical interface: Solid shaft, Servo flange