AFM60B-BEAC008192

Specification: Part Number 1054980 Power consumption: 0.5 W (without load) Moment of inertia of the rotor: 40 gcm² Bearing lifetime: 3.0 x 10^9 revolutions Start up torque: 0.8 Ncm (20 °C) CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Maximum operating speed: 6,000 /min MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) Resolution: 13 bit x 12 bit Repeat accuracy: 0.002 ° Max. number of steps per revolution: 8,192 Mechanical interface: Blind hollow shaft Resolution power: 8,192 x 4,096 Electrical interface: Connector M12, 8-pin, radial Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side SET (electronic adjustment): H-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Shaft diameter: 12 mm Error limits: ± 0.05 ° Mass: 0.2 kg Working temperature range: -30 °C ... 100 °C Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm EMC: (according to EN 61000-6-2 and EN 61000-6-3) Interface signals: Clock +, Clock -, Data +, Data- Operating voltage range: 4.5 V DC ... 32 V DC Resistance to vibration: 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Resistance to shocks: 70 g (according to EN 60068-2-27) Measuring step deviation: ± 0.01 ° Max. number of revolutions: 4,096 Measuring step: 0.01 ° Storage temperature range: -40 °C ... 100 °C, without package Initialization time: 50 ms Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) Operating torque: 0.6 Ncm (20 °C) Clock frequency: 2 MHz Max. angular acceleration: 500,000 rad/s²