MAIN CHARACTERISTICS product or component type SYNCHRONOUS MOTOR device short name BMP maximum mechanical speed 3600 RPM nominal output power 2200 W WITH DRIVE ATV32 AT 2.2 KW 400 V THREE PHASE nominal torque 14.01 N.M WITH DRIVE ATV32 AT 2.2 KW 400 V THREE PHASE nominal speed 1500 RPM WITH DRIVE ATV32 AT 2.2 KW 400 V THREE PHASE product compatibility VARIABLE SPEED DRIVE ATV32 AT 2.2 KW 400 V THREE PHASE shaft end KEYED IP degree of protection IP65 STANDARD holding brake WITHOUT mounting support INTERNATIONAL STANDARD FLANGE electrical connection ROTATABLE RIGHT-ANGLED CONN COMPLEMETARY CHARACTERISTICS range compatibility ALTIVAR 32 [Us] rated supply voltage 480 V network number of phases THREE PHASE maximum current Irms 8.3 A WITH DRIVE ATV32 AT 2.2 KW 400 V THREE PHASE nominal operating frequency 125 HZ WITH DRIVE ATV32 AT 2.2 KW 400 V THREE PHASE minimum operating frequency 13 HZ WITH DRIVE ATV32 AT 2.2 KW 400 V THREE PHASE maximum operating frequency 300 HZ WITH DRIVE ATV32 AT 2.2 KW 400 V THREE PHASE shaft diameter 24 MM shaft length 50 MM key width 8 MM motor flange size 140 MM torque constant 2.9 N.MA AT 40 C number of motor poles 5 number of motor stacks 2 rotor inertia 32 KG.CM stator resistance 1.24 OHM AT 40 C stator inductance 15.52 MH FOR Q-AXIS WINDING AT 40 C maximum radial force Fr 2240 N AT 1000 RPM maximum axial force Fa 0.2 X FR type of cooling NATURAL CONVECTION length 192 MM centring collar diameter 130 MM centring collar depth 3.5 MM number of mounting holes 4 mounting holes diameter 11 MM circle diameter of the mounting holes 165 MM product weight 12 KG